Brown corundum as a more commonly used artificial abrasive, often widely used in sandblasting operations, the reason why it is widely used The characteristics of this product have a great connection, so the following can be understood in detail according to the following introduction.
1. High efficiency: Generally speaking, the efficiency of brown corundum is related to its particle size, when the particles are small, the speed of the particles in the air flow will be faster, and it has sharp edges and edges, it will quickly hit the surface of the object being manipulated, so as to achieve the purpose of sandblasting or grinding.
2. High quality of surface treatment: when sandblasting, the abrasive can quickly enter the surface concave and convex part through the operation of the sandblasting machine, remove pollutants on the surface of the workpiece, in addition to rust, it can also remove pollutants such as soluble salts, and the surface of the workpiece after treatment is very clean, and there are no inserts in the concave and convex parts and joints.
3. Less dust: sandblasting abrasive will produce dust in the sandblasting stage, the specific gravity is higher than other abrasives, and the dust generated during use is also less, which can not only improve the operational efficiency of operators, but also improve the health indicators of operators by reducing the amount of dust inhaled by operators.
4. Low loss: In the characteristics of low loss, it refers to the product that consumes less when handling a certain item, that is, in order to reduce abrasive loss, the impact of particles on the surface of the object here is relatively small compared with the amount of influence of garnet particles on the surface, so its loss is low.
5, recycling: this is a very important point in the characteristics, – generally speaking, the number of repetitions can reach about ten times, even if the reuse has no effect, but after adding cement, it can be recycled into the construction industry, that is, environmental protection can reduce the user’s production costs.