Today, Sicheng Xiaobian will share with you the knowledge about the production process of glass beads, hoping to attract everyone’s attention and let everyone have a deep understanding of glass beads. In this way, everyone can know what to do when buying and using glass beads, and they are not in a hurry. I hope to inspire and help everyone.
(1) Check the forward and reverse rotation of the motor.
(2) Open the air inlet of the furnace body, start the induced draft fan, and evacuate the residual air in the furnace body. After five minutes, start the circulating water pump, and prepare for ignition after the downpipe of the furnace body flows smoothly.
(3) Open the air distribution port of a musket and start to ignite. First, point the ignition stick to the air distribution opening of the musket, slowly open the gas pipeline valve, and close the ignition rod after ignition. (Note: Do not increase the gas supply yet)
(4) Start the cooling auger, and start the two together.
(5) Start the vibrating screen.
(6) After everything is normal, do all inspections, the equipment is normal, the furnace temperature is normal, open the electromagnetic feeder, and start feeding. (Note: Do not supply too much current at the beginning)
(7) Check the quality of the glass beads, add the material slowly, and increase the production capacity of the furnace only when the quality is ensured.
(8) Make sure that the temperature of the glass beads does not burn the packaging before filling. Production process of glass microspheres Recycled waste glass → crushing and screening → glass sand (or purchase) → firing → cooling and screening → weighing and packaging.
