White corundum abrasive is resistant to acid, alkali and high temperature. Considering that the main component of white corundum abrasive is alumina, it should be cleaned with high-concentration hydrochloric acid or with a high-pressure cleaner. In addition, attention should be paid to the post-treatment process during the polishing process of the workpiece.
Therefore, it is best to take treatment measures before the white corundum abrasive waste settles, and use a circulating pump or a stirring device to keep the white corundum micropowder abrasive in motion all the time without rapid deposition.
When the workpiece is polished or the equipment is out of operation, the white corundum abrasive will not be deposited immediately, which is the best time to deal with the white corundum micro-powder waste.
If conditions permit, a hole can be opened at the bottom of the sedimentation channel, or a pump device can be used to suck out the white corundum fine powder waste, so that the abrasive and the mixed solution can be processed in time, reducing the difficulty and process of subsequent processing.